Pontiac Vibe programming software and calibrations going back to the 2003 model year are now available for download from the TIS2Web application.
It is no longer necessary to always replace the PCM on a Vibe with a pre-programmed module; instead, technicians can perform calibration updates for a number of performance concerns using the Calibration Update Wizard (CUW) application. (Fig. 4)
The CUW application is separate from SPS and needs to be downloaded to the PC. Once it is set up on the PC, it is easy to use to download the latest Vibe calibration updates. Check with your dealership's system administrator for setup and installation assistance.
To access the calibrations and software programming instructions:
1. Log on to TIS2Web
2. Click on the Help menu question mark (?) icon
3. Click on the Vibe Programming Application and Calibrations in the left column.
TIP: You must download and install the Vibe CUW Programming Application before being able to download any calibrations.
Calibrations downloaded using the CUW application are stored on the PC and can be used on multiple vehicles with either the MDI or Tech 2.
For additional information on downloading and installing the Vibe software, refer to bulletin #09-06-04-006A or contact the Techline Customer Support Center.
- Thanks to Mike Waszczenko
Leave a comment