Bulletin 08-08-50-007 is being published to explain how to properly remove the driver
or passenger seat back cushion finish panel/cover from the front seat of the 2006-08 Hummer H3.
Release the two upper spring type clips, followed by the two side clips, then the lower bottom retaining hooks.
1. Push the trim cover forward at the upper right corner with your hand.
2. Insert a trim tool on top of the clip and push down on it to release the spring-type clip from the frame (fig. 8). Repeat for the other side.
3. Once the two upper corners are released, grab each side of the back panel and pull outward to release the side clips.
4. Place one hand at each bottom corner of the back panel (between the panel and trim), press in and pull upward to release the bottom retaining hooks.
- Thanks to Terry Nicholas
Leave a comment