This information applies to the 2007 full-size utilities, which use a center-mounted support strut (gas spring) for the hood (fig. 8). 
Before closing the hood, be sure all the filler caps are properly installed. Then bring the hood from full open to within 6 inches (150 mm) of the closed position, pause, then push the front center of the hood with a swift, firm motion to fully close the hood.
- Thanks to Dave Roland
Before closing the hood, be sure all the filler caps are properly installed. Then bring the hood from full open to within 6 inches (150 mm) of the closed position, pause, then push the front center of the hood with a swift, firm motion to fully close the hood.
- Thanks to Dave Roland
Leave a comment