How to Take ACDelco Training
Go to acdelcotechconnect.com and click the Training tab to log in to the ACDelco Learning Management System (LMS).
· To enroll in an Instructor-Led Training (ILT) course, click the Enrollment link or the Instructor-Led Courses link.
· To launch a Web-Based Training (WBT) course, click the Web-Based Courses link to view the catalog and select a specific course.
· To launch a TechAssist (TAS) course, click the TechAssists link to view the catalog and select a specific course.
· To launch a Simulation (SIM), click the Simulations link to view the catalog and select a diagnostic challenge simulation.
New Training
The following ACDelco training programs have recently been made available via the LMS:
S-AT02-01.01WBT - Automatic Transmissions
This web-based course provides an introduction to automatic transmissions, including automatic transmission specifications, powerflow through an automatic transmission, the characteristics of automatic transmission cases, the proper operation of torque converters, and the function of automatic transmission gear select indicators.
S-AT02-02.01WBT - Automatic Transmission Gearset
The characteristics and operation of planetary and differential gearsets are covered in this web-based course. Also reviewed in the course is the disassembly and assembly of gearsets as well as how to service differential gearsets.
S-AT02-03.01WBT - Automatic Transmission Mechanical
Apply Components
This web-based course highlights the mechanical and apply components used in automatic transmissions. Topics covered include operation of the 1-2-3-4 clutch, characteristics of the 3-5 Reverse clutch, operation of the 4-5-6 clutch, characteristics of the 2-6 clutch, operation of the Low and Reverse clutch, and Low clutch sprag characteristics.
S-AT02-04.01WBT - Automatic Transmission Diagnosis
The processes and procedures for diagnosing automatic transmission concerns are discussed in this web-based course. It discusses the procedure for performing a preliminary inspection, the process for performing a road test, and the procedures used in post-road test diagnosis.
S-AT02-05.01WBT - Automatic Transmission Hydraulics
and Electrical Systems
This web-based course covers the components and operation of the hydraulic system and the electronic controls that drive the hydraulic system, including the functions of the valves located in the fluid pump assembly, the valves located in the control valve body, and the solenoids contained in the solenoid control assembly. The characteristics of the electronic control module, the control module inputs, and the transmission adaptive functions also are reviewed.
Current Instructor-Led Training
ACDelco's Instructor-Led Training (ILT) courses provide hands-on instruction on the latest automotive systems. The following ILT courses are currently being held at training center locations around the country. Click the Schedule link on the LMS Menu to search the latest training schedule for courses held in your area.
S-AC07-02.01ILT
Automotive Air Conditioning: Advanced Refrigerant System Diagnostics
S-AC07-03.01ILT
HVAC Control System Operation and Diagnostics
S-AC07-06.01ILT
Toyota HVAC
S-AC07-07.01ILT
Chrysler HVAC
S-BK05-01.01ILT
Braking Systems
S-EL06-04.02ILT
Network Communication
Diagnosis
S-EL06-10.02ILT
Electrical Power Management
S-EL06-11.01ILT
Automotive Electrical Circuit
Diagnosis and Repair
S-EL06-12.01ILT
Hybrid Technology and Service
S-EP08-02.01ILT
Engine Performance: Computer
Controls and Ignition System Diagnostics
S-EP08-03.01ILT
Engine Performance: Air
Induction and Fuel System Diagnostics
S-EP08-04.01ILT
Engine Performance: Fault
Monitoring and Emission System Diagnostics
S-EP08-05.01ILT
Engine Performance: Advanced
Drivability Diagnostics
S-EP08-20.01ILT
Toyota Engine Performance
S-EP08-21.01ILT
Chrysler Engine Performance
S-EP08-81.01ILT
Duramax 6600: Diesel Engine
Performance
S-SS04-01.01ILT
Vibration Correction
Diagnostics
S-ST10-01.01ILT
Supplemental Restraint
Systems
Leave a comment